300SL

300SL Roadster

HALF SCALE-CLASSICS
Available with petrol and Electric Motor

EINZIGARTIGE SAMMLERSTÜCKE

With the necessary Passion and Attention to Detail, the Vehicles will be built over a Period of approx. 6 Weeks handmade. Each Vehicle can be individually equipped and configured.
Along with the unique Vehicle Number
In this way, it becomes an individual Collector’s Item.
Perfect proportions in a 1: 1.65 model with great attention to detail.

STARKE TECHNIK

HALF SCALE-CLASSICS

MOTOR/ PERFORMANCE

5,0 KW bei 8500 U/Min

KM/H

Electric Version

  • Power: 1.2 KW
  • Range: Up to 3 Hours Full Throttle on full Charge
  • Top Speed: 45 KM/h (limited to 6 KM/h)
  • Incline up to 30%

Technical Data:

  • Drive engine: 48 Volts BLDC 1200W
  • Transmission: Fully Automatic forward/Reverse
  • Propulsion: 10:1 Direct Drive with Lock Differential, Rear-wheel drive
  • Battery: 12 Volts battery 40Ah
  • Controller: 48 Volts, 75A 30 Tube
  • In the Nous: 12 Volts
  • Charging Unit: Automatic, 220VAC ± 10%, 3h
  • Lighting, Honk
  • Direction Indicator: 12 Volts

Petrol Version

  • Power: 5.0 KW at 8500 U/Min
  • Top Speed: 45 KM/h
    (Limited to 6 KM/h)

Technical Data:

  • Front engine, rear-wheel drive, cardan shaft drive
  • Engine: 110cc air-cooled 4 Clock engine 1 Cylinder
  • 3 Gang Semi-automatic, Reverse Gear, Cardan wave
  • Lighting, Honk
  • Direction Indicator: 12 Volts

Dimensions:

Gross Measurements with Attachments
Length: approx. 2900 mm, width: approx. 1180 mm, height: 1200mm,
Large weight: 380kg
Ground Clearance: 160mm

Equipment (Electric and Gasoline Version):

The 300SL Roadster is equipped with an adjustable driver’s seat suitable for drivers aged 6 and over. The adjustable Pedal Block makes it possible for drivers over 190cm to drive the Vehicles. The Bonnet Opens in a Forward Tilt Position using a spring Hinges System. The rear Trunk has a Locking System. Both are served from the Cockpit.

  • GFK seat and Side Pockets with vinyl or Leather Trim.

The Body is equipped with a DuPont car paint in the Colour you want. All we need is a DuPont color code to customize.

  • Aluminum steering wheel painted white
  • Aluminium/Stainless steel Trims.
  • The Vehicles are equipped with a Handbrake.

RAHMEN

  • It is a steel Frame-based Construction, 
  • The Vehicles have a high Level of stability and Driving Safety
    Gives.
  • The Frame is painted and partially powder-coated.

The adjustable (movable) driver’s seat makes it possible to
that drivers over 190cm can also drive the vehicles.

KAROSSERIE

  • The Body is made of fibreglass reinforced Plastic
    (GFK) made, as well as the Floorboard.
  • The Driver’s seat is also made of GFK and
    Leather or Faux Leather related.

AUFHÄNGUNG UND FEDERUNG

  • The Front Axle suspension corresponds To a double Wishbone Single-wheel suspension.
  • The Rear Axle suspension is a single-Wishbone suspension. Each With Steel Springs and adjustable gas pressure shock absorbers.

LENKUNG

  • Rack steering mounted in The middle.

BREMSEN

  • Two-circle disc braking system with Double Brembo Brake Brakes.
  • 2 Brake Pliers at the front and a Brake rod at the back results in a Brake Force distribution of 66/33.

EINZIGARTIGE SAMMLERSTÜCKE

EDLE INNENAUSSTATTUNG

Classic Models are the Godfather of The elegant Interior.

Mehr Lesen

INDIVIDUELLE FARBPALETTE

Through our Individual Production, we fulfill special colour requirements.

Mehr Lesen

EUROPÄISCHES ENGINEERING

Our Vehicles are based on
European Engineering Knowledge with
Modern CAD Technology has been developed.
The focus is On high
Quality, Strength and
Use of high-quality Series parts.