EINZIGARTIGE SAMMLERSTÜCKE
With the necessary Passion and Attention to Detail, the Vehicles will be built over a Period of approx. 6 Weeks handmade. Each Vehicle can be individually equipped and configured.
Along with the unique Vehicle Number
In this way, it becomes an individual Collector’s Item.
Perfect Proportions in a 1:2 model with great Attention to Detail.

STARKE TECHNIK
HALF SCALE-CLASSICS
MOTOR/ PERFORMANCE
5,0 KW bei 8500 U/Min
KM/H
Electric Version
- Power: 1.2 KW
- Range: Up to 3 Hours Full Throttle on full Charge
- Top Speed: 45 KM/h (limited to 6 KM/h)
- Incline up to 30%
Technical Data:
- Drive engine: 48 Volts BLDC 1200W
- Transmission: Fully Automatic forward/Reverse
- Propulsion: 10:1 Direct Drive with Lock Differential, Rear-wheel drive
- Battery: 12 Volts battery 40Ah
- Controller: 48 Volts, 75A 30 Tube
- In the Nous: 12 Volts
- Charging Unit: Automatic, 220VAC ± 10%, 3h
- Lighting, Honk
- Direction Indicator: 12 Volts
Petrol Version
- Power: 5.0 KW at 8500 U/Min
- Top Speed: 45 KM/h
(Limited to 6 KM/h)
Technical Data:
- Front Engine, Rear-wheel drive
- Engine: 110cc air-cooled 4 Clock engine 1 Cylinder
- 3 Gang Semi-automatic, Reverse Gear, Cardan wave
- Lighting, Honk
- Direction Indicator: 12 Volts
Dimensions:
Length: 1870mm, Width: 910mm, Height: 1130mm,
Net Weight: 220kg
Gross Measurements with Attachments
Length: 2110mm, Width: 1100mm, Height: 1200mm,
Gross weight: 370kg
Ground Clearance: 160mm

Equipment (Electric and Gasoline Version):
The S1 Roadster is equipped with an adjustable Driver’s Seat suitable for Drivers aged 6 and Over to 180cm In height. The Bonnet Opens in a Forward Tilt Position using a spring Hinges System. The rear Trunk has a Locking System. Both are served from the Cockpit.
- Additional Aluminium Cladding on the aluminium Centre Console is available as an option.
- GFK seat and Side Pockets with vinyl or Leather Trim.
The Body is equipped with a DuPont car paint in the Colour you want. All we need is a DuPont color code to customize.
- Aluminium/Wooden Steering wheel.
- Aluminium/Stainless steel Trims.
- The Vehicles are equipped with a Handbrake.

RAHMEN
- It is a steel Frame-based Construction,
- The Vehicles have a high Level of stability and Driving Safety
Gives. - The Frame is painted and partially powder-coated.

The adjustable Pedal Block makes it possible to
That even Drivers over 190cm the Vehicles
Be able to drive.

KAROSSERIE
- The Body is made of fibreglass reinforced Plastic
(GFK) made, as well as the Floorboard. - The Driver’s seat is also made of GFK and
Leather or Faux Leather related.
AUFHÄNGUNG UND FEDERUNG
- The Front Axle suspension corresponds To a double Wishbone Single-wheel suspension.
- The Rear Axle suspension is a single-Wishbone suspension. Each With Steel Springs and adjustable gas pressure shock absorbers.

LENKUNG
- Rack steering mounted in The middle.
BREMSEN
- Two-circle disc braking system with Double Brembo Brake Brakes.
- 2 Brake Pliers at the front and a Brake rod at the back results in a Brake Force distribution of 66/33.
EINZIGARTIGE SAMMLERSTÜCKE

EDLE INNENAUSSTATTUNG
Classic Models are the Godfather of The elegant Interior.


INDIVIDUELLE FARBPALETTE
Through our Individual Production, we fulfill special colour requirements.

EUROPÄISCHES ENGINEERING
Our Vehicles are based on
European Engineering Knowledge with
Modern CAD Technology has been developed.
The focus is On high
Quality, Strength and
Use of high-quality Series parts.

